Ecowitt WITTSWITCH AC1100

Follow these steps to set up your WITTSWITCH AC1100 and integrate it with Fry Networks to begin contributing to the decentralized energy-monitoring network.

---

Setting Up the Ecowitt GW1200 Gateway

Follow these steps to set up your Ecowitt GW1200 Gateway and connect it to your account.

---

Step 1: Install the Ecowitt App

• Download the Ecowitt app from the App Store (iOS) or Google Play Store (Android).

---

Step 2: Register and Log In

• Open the app and create an account if you don’t already have one.

• Log in to your account.

---

Step 3: Enable Location and WiFi

• Make sure the app has precise location services enabled.

• Ensure WiFi service is active on your phone.

---

Step 4: Disable Cellular Data

• Temporarily disable your phone’s cellular data service until all setup steps are complete.

---

Step 5: Add a New Weather Station

• In the app, tap Menu → Weather Station → + Add a New Weather Station.

• Follow the on-screen instructions to complete the hub setup and add it to your account.

You can add multiple gateways under a single account.

---

Pairing the Ecowitt AC1100 with the GW1200 Gateway

Follow these steps to pair the AC1100 Smart Plug with your GW1200 Gateway:

1. Power On the AC1100:

   • Plug the AC1100 into a power outlet.

   • Press and hold the button on the AC1100 for more than 5 seconds. The blue light will flash, indicating it is in pairing mode.

---

Step 1: Open the Ecowitt App

• Open the Ecowitt app on your phone.

---

Step 2: Access the Gateway Dashboard

• Enter the GW1200 Dashboard in the app.

• Tap the '...' icon in the top-right corner.

---

Step 3: Add the AC1100

• Select + Subdevice and choose the icon for the AC1100.

---

Step 4: Confirm Pairing

• Tap Device is in Pairing Mode and wait for the pairing success notification.

---

Step 5: Complete Pairing

• Once pairing is successful, the app will automatically navigate to the AC1100 interface.

---

Linking and Registering Your Energy Gateway with Fry Networks

1. Link Your Device:

   • Connect your Ecowitt AC1100 to the Fry Networks energy portal: https://energy.frynetworks.com/.

2. Register Your Gateway:

   • After setup is complete, register your gateway on the Fry Networks Dashboard to activate network participation.

For detailed step-by-step instructions on registering and verifying your gateway, refer to the Registration Guide.

---