PurpleAir Sensor Setup Guide

---

Some of you may have received PurpleAir sensors for your air quality miners. This is often due to the LoRaWAN frequencies used by other brands like Ambient and Ecowitt not being supported in certain countries.

---

Overview

To begin, you need to:

1. Make your PurpleAir sensor visible on the PurpleAir map.

2. Configure it to connect to a WiFi network.

3. Register it to the PurpleAir map.

Note: During registration, you’ll need the Device-ID and Associated Email. If you don’t know these, please open a ticket in our Discord Helpdesk. Join our Discord here : https://discord.gg/frynetworks

---

PurpleAir Setup and Registration

Helpful Resources

• PurpleAir Setup Guide and Registration Links:

  • WiFi and Registration Guide
  • Sensor Registration Portal
• Helpful Videos:

  • How to Set Up PurpleAir Sensors
  • How to Register PurpleAir Sensors

---

Configure and Register Your PurpleAir Sensor

Follow the instructions from the above resources to:

• Connect your PurpleAir sensor to a WiFi network.

• Make your sensor icon visible on the PurpleAir map.

• Register your sensor on the PurpleAir map with the required details.

---

Link Your Sensor to Fry Networks

Once you’ve finished setting up and registering your PurpleAir sensor:

• Visit air.frynetworks.com to link your air quality sensor with Fry Networks and start earning rewards.

---

Registering the PurpleAir Miner

After completing the setup, register your miner on the Fry Networks Dashboard to start earning rewards.

For detailed step-by-step instructions on registering and verifying your miner, refer to the Registration Guide.